Showing posts with label tension. Show all posts
Showing posts with label tension. Show all posts

Thursday, January 21, 2010

Embroidered Nose

This is the one that gave me trouble. The first couple bears I made I'd start out embroidering the nose and end up sewing a felt nose. I finally got the hang of it, though I'm never surprised if I have to pull one out and start again.


I just realized I should have 2 round headed pins on either side to show the width of my nose. I always eyeball it (maybe that's why my noses are crooked). Just like the felt nose we'll leave the end of our thread out. The next stitch should be just outside where we first went in.


I tend to feel my way through a nose. Sometimes they're triangle shaped, sometimes rectangles. If you'd like a specific nose you will want to make a template out of felt in the shape you want. Often when using a template you would stitch the perimeter with your embroidery floss and then fill the inside. I personally don't like the look of stitching around first. Probably another reason for my mess ups!


OK, I have a good shape going here.


Make sure your nose is completely filled in. Your last stitch will finish at the bottom of your mouth.


Same as yesterday, lift the stitches a bit at the bottom of your nose for your center line and out to the side.


Then out to the other side.

Your last stitch completing the mouth goes back up. Try to come up under the stitches there by your first stitch. We want to hide that knot under those top stitches.


Gently double knot. This knot should tuck under the stitches at that top corner where you started and ended.

Thread your needle again. Sewing under the top stitches, take one thread at a time, through the face.

Holding the tension, cut the thread close to the fabric. The thread disappears.


Another cute nose!

Wednesday, January 20, 2010

Felt Nose

There are two ways that I put noses on bears. Actually I'd say I did the one and then graduated to the other. My noses always go on crooked though, it doesn't matter how I do them. I tell myself it adds character. What I found to be easier and didn't have to practice at a lot was cutting a nose shape out of the felt that I used for the foot pad. For me this was easy. If you embroider then wait until tomorrow and I'll show you my embroidered nose. Both noses are very cute!

Here's my nose shape for this demonstration. A simple rounded triangle shape is also good.


After lots of trial and error I've learned to leave my end thread out, you'll see it there until the end. I'll show you why later. Go behind the felt to start your first stitch.


Stitch around, big or small stitches, close or far stitches. The only thing I'd say is be consistent once you choose a style. I suppose if you wanted the stitches more invisible you could use same color thread and add the mouth later with embroidery floss. Oh, sorry that's what I'm using here.


Once you get back to the place you started and you are making your last stitch, send your needle down to the place you'd like your mouth to end.


Next stitch lift the felt a tiny bit to hide the end of the top line of your mouth. Come out where you'd like the side of your mouth to end. Up for a smile, down for a frown and straight across for that cute blank look.


I always get this part wrong. I come up on the other side either too short or too long. The fabric does not make this easy. I do try to get both sides the same length even if my nose is crooked!

To finish your mouth stitch through the middle, then take it up and under the felt where you left that end thread. I told you we get back to that.

Make a double knot that should tuck under the felt. You remember what happens next, you take those two end threads, thread them through a long needle. Right at the knot, under the felt take those threads, one at a time, through the head. Hold the thread with tension and cut close to the fabric.

What a a simple nose!

Tuesday, January 19, 2010

Button Eyes


If you push in on his face like so his nose will bend up in a natural place. This gives you a natural position on the face along the seam to place the eyes. While playing around with your eyes before, you may have found a place you liked better, stick with that then. This is a general guide line.



Go ahead and stick your round headed pins back in the places you've chosen. Now it's time to get out the heavy thread. I normally double the thread and stick the loop through the button hole. Pull the ends through the loop to secure the thread to the button.



Like so.



Thread the two thread ends of one eye into the eye of a long needle. That sounded redundant! Push the needle through to the back of your teddies head towards the bottom around one of the seams. Your felt pad here will get in the way a bit so you'll have to poke around.



Pull the thread through.



Do the same thing again except bring your thread out next to but not in the same place as your last thread.



OK, I'm not gonna fool you here. I had mine knotted up and I wound up cutting it out again and starting over. Once you have your two threads through the back make a single knot, pull both strings gently in opposite directions, turn your bear over and look at him. You're going for a slight indent to the face, both eyes with even tension. Once you're there, and it might help at this point to have another person there to hold that tension, you need to knot it for good. It's not easy, this is probably the hardest part.

If you got the tension right, if you got the second knot done, turn him around again. Give his eyes a push in to relieve the tension on the buttons. Are they still right? If yes we'll proceed, if not start over, sorry.



OK, knot these threads up a couple more times. The picture above shows me taking two threads at a time, close to the knot, back into the bears head.



I've come out through the cheek. Again hold the tension on the thread and cut close to the fabric and the thread will disappear.



Sewed in eyes but a temporary nose. We need to work on that!